The Main Screens are where data is displayed during normal use. There are a four of screens for G-meters, graphs, location data and status. Control is via the left and right buttons at the bottom and two pop up menus using the buttons at the top. The i button pops up context specific options. The flag button accesses the goto marker options as well as web, email and camera.
This is the main TrakPal display where current speed, maximum speed and over speed alarms are displayed. See Speedometer Settings and Speed Alarms for more information.
The compass display shows compass heading relative to direction of travel. Direction to selected Goto Marker and comparison Trak are also shown when set.
Left/right and forward/back G or tilt readings are shown.
This button shows the accelerometer display. When the GO button is pressed at start up, TrakPal takes a reading of the local vertical - you should mount the iPhone at this point while the car is stationary. Alternatively see System Settings for further details on accelerometer calibrating and set up.
The compass display shows compass heading relative to direction of travel. Direction to selected Goto Marker and comparison Trak are also shown when set.
The graph display show a real time history of various things like speed, acceleration, altitude.
Data is shown in numerical format for speed, altitude, position, etc as well as a tape heading and sun and moon rise/set times and moon phase.
Uses the iPhone's in build map facility to display current position as well as heading compass.
© www.DSETechnology.co.uk 2010